5 Top Tips On How To Clean Your Aircraft


If you own an aircraft or you just fly it, you must be concerned with its cleanliness. Just because itflies high above and away from the public eye doesn’t mean it can live with stains. Dirt, paints, and creases, if not dealt with often can reduce the lifespan of the plane by two or more year. Aircraft cleaning is just as mandatory as car washing.

Unfortunately, washing an aircraft is not as simple as washing a motorbike or car. There are several sections that demand extra care and attention, and you don’t wash using any solution; only aviation certified products can be used.

Things to keep in mind before the washing begins

  • Cleaning solution

An aircraft is made of aluminum metal, and therefore, only a couple of washing solutions can be used. Alkaline and acidic solutions will chip off the paint and corrode the metal. Stick to Powerfoam, Glaze wax, and other recommended pilot supplies.

Supreme Glaze Wax is found to be effective in keeping the aircraft body super shiny while keeping the paint intact.Power foam Foaming Cleaner, on the other hand, will clean all the bugs, dirt and carbon from the craft’s exterior without negative effects. If a simple spray that you direct towards a target.

  • Be cautious with Plexiglas

Plexiglas is delicate and thus not advisable to clean using ahigh-pressure washer. There are specialized cleaners and sprays one can use instead. Also, plenty of water with gentle rags can get the work done. Use antistatic wipes to dry off water from the glass surfaces to avoid water streaks.

  • High-pressure washing

The first stage of aircraft cleaning usually involves blowing off dust and debris from the plane’s body with a high-pressure horse. Water will come in during the thorough cleaning phase. As indicated earlier on, avoid directing pressure pipes on the Plexiglas. Also, water used to clean aircraft contains dirt, debris, and other pollutants hence, you need to dispose it appropriately.

  • Use solvents in moderation

While some dirt may necessitate the use of solvents, it’s normally advisedagainst. Solvents can break the seals on craft parts or remove grease resulting in corrosion or friction. If you have to use solvent, use it carefully and in small amounts.

  • Some effort will always be needed

Some aircraft cleaning productsdo indicate that you don’t have to use effort to remove creases and dirt. Well, that’s never true. Stubborn and deeply embedded dirt cannot come off without applying some energy. If the cleaning product cleans the dirt without straining, then it is aggressive, and your aircraft parts are being eroded.

Aggressive solutions can also have terminal effects when accidentally consumed.


These are some of the things you need to know concerning aircraft cleaning. There are many cleaning products on the market; some are effective, and some are not. If you don’t know the right cleaning product for your plane, get help from experienced professionals.


Leave a Reply

Your email address will not be published. Required fields are marked *